Our NH series connectors’ high reliability and adaptability were the foundation for developing our XH connector. A plug-type wire connector is designated JST-xhr-4p plug and a PCB mounting socket. Appropriate for use in applications such as monitoring 3-cell LiPo batteries or any other battery or power application.
Electrical connectors, known as Jst-xhr-4p plug connectors, are manufactured to meet the design standards that were initially developed. Connectors come in a wide variety of series (families) and pitches (pin-to-pin distance), all of which are produced by JST.
The mounting height of the connector is only 9.8 millimeters, making it an extremely compact component (.386″). However, it can meet the requirements for high-density mounting and the miniaturization of electronic equipment, such as videocassette recorders, radio cassette players, and car stereo systems.
Because they were designed for wave soldering rather than reflow soldering methods, most JST through-hole headers cannot withstand the temperatures required for reflow soldering. This is due to the plastic having a lower melting point. Specific surface-mount titles from JST are built to withstand the higher temperatures associated with reflow soldering. Wholesale distributors typically purchase large quantities from manufacturers and suppliers, then break down and store those large quantities of goods.
The pin spacing for the JST-xhr-4pin standard is 2.5 millimeters. There is a male connector on one end with four pins labeled JST-XH, and on the other end, there are bare cables. In addition to that, the female connector that is compatible with it is included. This product comes with a bundle that contains four different connector pairs. Even though it has a pitch of 2.5mm, the JST-XH works very well in most applications that require a rise of 2.54mm, such as Vero and protoboard.
First point of contact with the folded beam
This connector has a protected folded beam contact that folds back on itself to provide high contact pressure and an over-stress stop feature. When utilized in conjunction with circuits carrying low current and low voltage, this guarantees dependable continuity (dry courses). As the wire crimp part is mechanically isolated from the post-insertion segment, the crimping process will not negatively impact the mating region.
Header in the form of a box with a covering
When inserting or removing the receptacle, the square-shaped shroud with four sides protects the receptacle from being inserted or sprayed. The cover stops foreign matter from getting to the posts and resists contact deformation that can occur during shipping and handling. In addition, a serrated, oversize square post is pressure-fit into each square hole before the dip soldering process begins. This protects the base entirely from heat and prevents flux from entering the cavity.
A header that includes a boss
This header has a boss (projection) on the bottom of the housing to prevent incorrect insertion in printed circuit boards. This is done to avoid damage to the header.
This plug and socket set for a JST Xhr 4p plug with a 2.54mm pitch come with a cable. The line is 30 centimeters long and has a gauge of 26 on the American Wire Gauge scale.
- PCs and other lab equipment have access to an AC power supply.
- Utilized in every variety of RCs ( cars, boats, planes).
- Additionally utilized in CCTV connections, pick-ups, and other applications.
- Utilization of a material that is resistant to electrical fires.
- Strong and long-lasting.
- Safe and simple to put in place.
- RoHS compliant.
You will find several options when shopping for a JST-XHR-4p plug with an extremely long lifetime. Wholesale distributors’ jst-xhr-4p plugs are available. Because of the importance of this factor to the longevity of the jst-xhr-4p plug, you should take your time in locating a plug that is a good match for the environment in which you intend to use it.